Category: LV9000-Series

(Results from 1 to 10)
What will happen if the voltage on an L lock goes above the 26V maximum range?
Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUOvervoltage will cause the lock to shut down for approximately 5 minutes to allow the circuitr...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What power supply do I use with an L9000 electrified L lock?
Applies to L9080EL/EU, L9082EL/EU (Discontinued) The Schlage L9080 EU/EL and L9082 EU/EL require 24 VAC/VDC with a peak current of 1.3 Amps at 5 to 10 second intervals and a holding cur...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » System Components » Power Supplies » PS900 Series » Schlage Electronics
How do you install an L9000 lock less outside escutcheon trim?
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can the Gen2 Indicator be used on a mortise holdback function?
You can use the Gen2 Indicator on the L9076 and L9077 holdback functions but the indicator is not sold with the complete lock.  You must order a kit as an upgrade and apply to the L9076 or L9077....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Are the electrified mortise locks available with the Vandlgard option?
As of 04/03/2020 the following electrified LV9000 locks are available; LV9090, LV9091, LV9092, LV9093, LV9094, LV9095, LV9492, LV9493, LV9494, LV9495.  See pricebook for availability and options....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
The Schlage electrified mortise lock motor makes noise when powered but will not lock or unlock after changing the lock handing.
When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying to r...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Is the 09-611 Chevron style indicator still available?
The 09-611 Chevron style indicator will remain available as a stand-alone part for sectional trim.  Pricing and ordering information is listed in the current pricebook....
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Are indicator kits available to add to an L9000 mortise lock?
Retrofit Indicator kits are available to add Indicator Trim to 36 compatible L9000 Series functions.A complete list of functions available with Indicator Kits, part numbers and pricing can be found he...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Can the driver be replaced on the Gen1 indicator for the Schlage L9000 locks?
 L583-709  Message sign, LOCKED/UNLOCKED, for 180 degree indicator - NO LONGER AVAILABLEL583-710  Message sign, OCCUPIED/VACANT, for 180 degree indicator - NO LONGER AVAILABLEL583-711 &...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What are the cylinder length requirements for the L9000 Gen1 (Discontinued) indicators?
For the Gen1 indicators, the cylinder length required (for standard 1-3/4” door) is 1-1/4” regardless whether the trim is sectional or escutcheon.For the older 09-611 (Chevron) sectional (rose) in...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series

Support by product