Is SL1 trim available for the LM9300 series lock?
The anti-ligature SK1 & SL1 are not offered with LM9300. This is due to the fact the latches can create ligature points. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series
Can the LM9300 be used on a pair of doors with a mullion?
The LM9300 can be used on a pair of doors without a mullion where the LM9300 is installed on the active leaf. The inactive leaf would require surface bolts at the top and bottom, and ASA/ANSI strike a...
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage
What is the maximum undercut for the LM9300 series?
Since Schlage does not dictate what type of threshold can be used with the LM9300, the maximum undercut should not be less than 1/8" and not greater than 3/4". The bottom rod should have a 1/2" e...
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage
Can the HL6 paddles be used on the LM9300 series lock?
The
LM9300 has not been tested or
certified for use with the HL6-9000
push pull trim....
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series
What cylinder cams are used on the LM9380?
On the Small Format Interchangeable Core (SFIC) and Full Size Interchangeable Core (FSIC) housings, the LM9380 IC cylinders will use special “handed” cams. RH Cam: L583-509 LH Cam: L583-...
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series
When did the L Series change to an new ADA Thumbturn?
Effective December 9, 2019, Schlage L Series mortise locks requiring a thumbturn will ship
standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the
existing ADA design w...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial