Category: L9000 Series

(Results from 71 to 80)
Is the HL6 9000 EO / EN option supplied with a blank plate?
The HL6 9000 EO/EN does not come with a blank plate for one side....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What is the armor front used with Schlage electrified mortise locks with DPS?
For L9090, L9091, L9092, L9093, L9094, L9095 with DPS (door position sensor) use armor 09-666 (1 1/4" wide) or 09-670 ( 1 1/16 wide)....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What kind of screws come with the L lock when SL1 trim is ordered?
When ligature resistant trim (SL1 or SK1) is ordered, then torx screws are substituted for the strike and for the armor front. The L283-121 is the screw pack we substitute/ship in plac...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Do we offer wood door Torx screws for the L9000 strikes?
We don't have a combo or separate Torx screw for wood doors.  The L583-371 is for metal doors only....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Do we offer a soffit latch for the Schlage multipoint lock?
The LM9000 series multipoint lock uses a soffit latch whereas the LM9300 lock uses a rod/bolt. (see the pictures below)              LM9000 soffit latch LM9300 ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series
When was the L9080EL/EU discontinued?
December 2014 is when the solenoid version of the electrified L9080 was discontinued.Was replaced by the motor driven L9092EL/EU.  ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Does the replacement L9000 inside escutcheon include thru-bolts when ordered as a part?
When the 09-632, 09-633, 09-634 or 09-635 are ordered, thru-bolts are included.  Inside escutcheon indicators will not include inside thru-bolts when ordered as parts. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What temperature does the L9000 fire door fuse release?
The L9000 Fire door fuse will begin to melt/release around 338 degrees Fahrenheit. ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is the anti-microbial finish available on ligature resistant trim?
630AM finish is available on both the SL1 and SK1 trim.630AM finish is NOT available with the HSLR trim.  (The extra thickness of the AM coating would cause the trim to bind)...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage
Can a Schlage mortise lock be installed in a glass door?
Schlage mortise locks cannot be installed in glass doors.  There has to be a stile or a pocket for the mortise lock.  ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series

Support by product