Category: MA-Series

(Results from 81 to 90)
Does the MA541 ship with handing screws?
Due to the function of the MA541 handing screws are not required nor will be shipped with the lock. Latch bolt retracted by knob or lever from either side.Deadbolt thrown or retracted by key outs...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the Falcon MA deadbolt throw?
The deadbolt throw of the Falcon MA series is 1"....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does Falcon offer a MA series mortise service kit?
The discontinued Falcon M series did offer internal lock case parts as serviceable parts, but there was no M-series service kit....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
When was the Falcon M series mortise discontinued?
The Falcon M series mortise was discontinued in April of 2010 and was replaced by the Falcon MA series mortise. There is no catalog available for the discontinued Falcon M series, however, the F...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the solenoid coil resistance on the MA series solenoid?
Resistance can be determined by dividing the voltage by the current.  12VDC divided by 0.42A = 28.57 24VDC divided by 0.21A = 114.28 ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the escutcheon screw dimensions for E77301 and E77300?
E77301 - 2" 10-24 UNC 2A  E77300 - 1.75" 10-24 UNC 2A ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is 630 Stainless Steel finish available on the latitude lever for Falcon MA series mortise locks?
The following lever designs are not available in 630 finish with Falcon MA series: Latitude, Longitude, Broadway, and Boardwalk ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the RX switch available as a separate item on the Falcon MA881?
The switch is not a servicable item. A complete lock case must be ordered with the switch factory installed. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What finishes are available with the indicators for Falcon MA mortise locks?
The Falcon MA Mortise indicators are available in 626 Stain Chrome or 630 Satin Stainless Steel only. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the 012727-000-30 emergency tool?
The 012727-000-30 was an emergency tool for the Falcon M series privacy functions (M301, M311, and M321).  This tool worked for doors up to 1 3/4" thick.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series

Support by product