Category: MA-Series

(Results from 71 to 80)
Did Falcon mortise locks have a latchbolt with a nylon insert?
Older Falcon mortise locks had an option with a latchbolt assembly that had a nylon insert. This latchbolt assembly was discontinued in 1993. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Falcon
Will a Corbin Russwin Master Ring cylinder fit into a Schlage mortise lock?
Neither Schlage or Falcon make a cam for a Corbin Russwin Master Ring cylinder to be used in a Schlage or Falcon mortise lock....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can I use a cylinder on a Falcon MA311?
This is not possible as the Falcon MA311 does not have any cylinder retaining components in the lock case.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is included with the Falcon MA series Trim Packages?
The Falcon MA Trim package contains inside and outside trim, screw pack with mounting hardware. Does not include armor front or strike.    ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
In a Falcon MA mortise lock, how far does the key need to turn to retract the latch?
In Falcon MA mortise locks that have latch retraction by key, latch retraction begins at 4 o'clock (about 120 degrees) and latch is fully retracted at 5 o'clock (about 150 degrees).   ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Are screws supplied with the MA strikes or armor fronts when ordered separately?
Screws are not provided with armors or strikes when ordered separately. Please order S76300 if additional screws are required....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the Falcon MA series latchbolt throw?
Latch bolt: Two-piece stainless steel, mechanical anti-friction bolt. 3⁄4" projection., stainless steel with two 3⁄16" diameter hardened steel, free-turning, saw-resistant roller. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
How do you remove knob trim from Falcon MA mortise lock?
The Hana knob on Falcon MA locks (discontinued 2021) has a catch. Depress the catch to remove the knob.  After knob is removed, rose can be removed to gain access to the mounting scre...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does the Falcon MA still offer a Hana Knob?
The Hana knob was offered up until December 31st, 2021.  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Can you convert the Falcon MA851 to MA881 in the field?
In field conversion from fail safe to fail secure (or from fail secure to fail safe) is not possible on the Falcon MA series because different lock bodies are used.   A7851-12-xx&nb...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series

Support by product