Does Falcon have a breakaway lever trim feature on mortise locks?
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
MA lock case dimensions.
See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them.
CL refers to "Centerline".
...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the MA lock handing field reversible?
The MA lock is field reversible, except for the MA161 function (Connecting room/exit latch). The MA161 handing must be specified at the time of ordering and cannot be re-handed in the field.The proces...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What template to use for the Falcon MA mortise lock?
The following templates are for the MA lock. Use the matrix in each template for the specific function. See here for Rose trim - https://us.allegion.com/content/dam/allegion-us-2/...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Will a Schlage L9000 thumbturn work on a Falcon MA lock?
The Schlage 09-509 Rose style thumbturns will work but the spindle sits 90 degrees off from each other (Schlage is square, Falcon is diamond). The result is the throw will end up 10 and 2 o'cloc...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
How does the MA531 operate?
MA531 (ANSI F20) Apartment Corridor Door Lock
Latch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated by k...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series