Category: MA-Series

(Results from 21 to 30)
On what door thickness can the Falcon MA Indicators be installed?
The Falcon MA Sectional Indicator, AE55012-XX or the Escutcheon Indicator AE87012-XX, will fit doors up to 1-7/8" E.E. door dimension. There are no Special Order options available....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the break away point for MA lever spindle?
The lever spindles for the MA have a breaking torque of 45-55 ft-lb....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What are the differences between S76806 and S76816 Falcon part numbers?
Part number S76806 are spindles used with levers on standard door thickness of 1 3/4 to 1 7/8" or knobs with a door thickness of 1 7/8 to 2 1/2". Part number S76816 are spindles used for le...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Do Schlage or Falcon mechanical locks carry the American Iron and Steel certification?
Schlage and Falcon mechanical locks do not carry the American Iron and Steel (AIS) certification.American Iron and Steel Act (AIS) The only product that Allegion can provide AIS documentation for at t...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Will Schlage L9000 mortise trim fit on a Falcon MA mortise lock?
Falcon MA trim will not fit on L9000 mortise locks, nor will Schlage L9000 trim fit on Falcon MA mortise locks. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can the electrified MA handing be changed?
The Request to Exit (RX) on the MA851 or MA881 monitors both sides and does not require Rehanding....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What door prep is required for Falcon Single Dummy MA12 with rose trim?
The Falcon MA12 Single Dummy trim does not have a lock body thus no mortise pocket.The following holes should be drilled based on the trim type:For rose (sectional) trim, drill the hole for lever spin...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What door prep is required for the Falcon Double Dummy MA18 with rose trim?
The Falcon MA18 Double Dummy trim does not have a lock body thus no mortise pocket.The following holes should be drilled based on the trim type:For rose (sectional) trim, drill the holes for lever mou...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Is the Falcon MA series mortise locks available in 613 finish?
The 613 Oil-Rubbed finish was discontinued for the Falcon MA mortise locks in February 2025. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is the difference between the Falcon M and MA series mortise locks?
M is discontinued and was replaced by the MA.Here are some of the major differences between the M and MA-Series. Lever mounting post holes -  Locations have changed on door template.  (...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series

Support by product