How do you specify that cylinders should not be pre-installed but packed loose in the box with the lock?
Use "PCL" to specify that cylinders should be packed loose in the box rather than pre-installed into the lock assembly.
Example: ND53PD RHO 626 PCL
Available for the following lock ser...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What is the 161 door prep?
For Bored/Cylindrical locksets conforming to ANSI A115.2. The 161 Prep is a cylindrical lock prep with a bore diameter of 2 1/8” The edge of the door will have a 1-1/8″ x 2-1/4″ ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » K Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What are the dimensions for the Schlage HSLR Cylindrical Trim?
The Overall Width dimension is 6.17".
The Overall Length dimension is 8.48".
The Lever Height is 3.01" as measured from the Face of the Door.
Click here for more informat...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
What to know when ordering the ND Series with HSLR trim.
The ND HSLR is only available with a 2-3/4" backset deadlatch, part number 13-247. No other substitutions.
The ND HSLR Trim is only available in 630 finish.
The ND...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
What does the LLLSPD stand for on older Schlage product labels?
The designation LLLSPD appeared on some Schlage product labels.
The LLL signified that lock was ordered "less" some component, such as latch or strike
The SPD stood for special discount...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Is the N523-014 still offered?
The N523-014 outside housing was replaced by the 24088544 outside housing and is direct replacement.
See here for 24088544
See here for discontinued outside housing N523-014
...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the new ND78 and ND98 function?
Same lock function with a different key operation.The ND78 and ND98 functions have a 180-degree key rotation that locks or unlocks, unlike the ND75 and ND95 which have a 360-degree rotation to lock an...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage