Category: ND Series

(Results from 71 to 80)
Can the ND81 be ordered for a thick door?
The ND81 can be ordered for a non standard door thickness (Example: ND81PD 2-1/2" EE RHO 626). ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the difference between Vandlgard and Break away levers?
Break away levers are designed with a break-away point on the lever that will cause the lever to break off with excessive torque. This break away lever cannot be reset and will need to be replaced. ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What parts are supplied in the 10-140 Corbin Russwin KIL Cylinder kit?
The 10-140 Corbin Russwin KIL Cylinder kit contains the following: N523-023 Tailpiece  P516-009 Instruction Sheet N523-234 KIL Insert not sold separately. ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What parts are supplied in the ALX and ND 10-141 Corbin Russwin FSIC 7 Pin Cylinder kit?
The 10-141 Corbin Russwin 7 Pin FSIC Cylinder kit contains the following:      N523-230 Cylinder Driver not sold separately. P516-009 Instruction Sheet....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What parts are supplied in the ND 10-142 Yale FSIC 7 Pin Cylinder kit?
The 10-042 Tailpiece kit contains the Yale 7P Driver, Retainer and Screw.  Individual parts not sold separately.    ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What parts are supplied in the ND 10-143 Medeco 32 FSIC Cylinder kit?
The ND 10-143 Medeco 32 FSIC Cylinder kit contains the following: Tailpiece kit not sold separately (contains Driver and Retainer). Instruction Sheet.            &...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Does Schlage have video installation for the HSLR trim?
Please click here for link for video installation instructions....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Will the N523-127 FSIC driver work for both old design ND locks (pre-February 2017) and current ND locks?
The N523-127 Full Size Interchangeable Core (FSIC) driver will work for ND locks made before and after the February 2017 redesign. Early versions of the ND lock utilized the N523-077 or N523-118...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
How do you specify that cylinders should not be pre-installed but packed loose in the box with the lock?
Use "PCL" to specify that cylinders should be packed loose in the box rather than pre-installed into the lock assembly.  Example: ND53PD RHO 626 PCL Available for the following lock ser...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What is the 161 door prep?
For Bored/Cylindrical locksets conforming to ANSI A115.2.  The 161 Prep is a cylindrical lock prep with a bore diameter of 2 1/8” The edge of the door will have a 1-1/8″ x 2-1/4″ ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series