What is the bore hole size for the AL and ND series latches?
Depending on the latch selected for use with the AL or the ND series.
Both the AL and ND series would require a 7/8" or 1" bore for the latch, depending on latch selected. Please check the...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the difference between a 10-001 and 10-013?
The difference is material thickness.
10-001 is 0.064" thick
10-013 is 0.080" thick
The 10-001 and 10-013 are both square corner, T-strike, with box 1 1/8” x 2 3/4" offered in d...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
How do you specify the breakaway lever on the Schlage ND lock?
To order the Schlage ND lock with an exterior breakaway lever, you must specify the Rhodes design and the correct corresponding "XN" number for the cylinder type from this list (Rhodes lever is only d...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Can you order the ND81 with RX?
The ND81 can be ordered with RX like other current models. ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series