Category: AL Series - Discontinued

(Results from 41 to 50)
AL-Series Plunger Assembly Instructions
Changing the plunger assembly on the AL-Series requires disassembling the chassis.  Refer to Plunger Assembly Instructions for guidance....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What is the difference between the standard lever inserts for the pre-2002 AL and the old D Lever?
The old D-Series Lever used a standard lever insert similar to the pre-2002 AL-Series standard lever insert.  The old D Lever insert was smaller than the AL and the two were not compati...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
New FSIC driver info for the AL locks.
The new AL FSIC driver part number is A700-052.  This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining rin...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What is the part number for an AL Series cylinder?
Refer to table 1 for the list of Schlage AL-Series cylinders.     AL-Series Cylinder Reference Table    Function  Cylinder Mechanism  &nbs...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
How do you convert an AL44 to an AL40?
To convert the AL44 to an AL40 you can replace the outside plunger unit in the chassis or order the AL40 chassis.  Replacing the plunger unit is more difficult and time consuming and would not be...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Schlage
Will Schlage locks with a BD suffix accept a BEST SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the l...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Portable » CL Series | Schlage Commercial » Mechanical Locks » Portable » Padlocks
What is the part number for the AL SFIC spacers?
The part number for one spacer is D500-000....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What are the lever returns on the AL lever designs?
California code requires no more than a 1/2" lever return (distance between the tip and the door face). The AL series Saturn (SAT), Neptune (NEP) and Omega (OME) meet this requirement, The AL series J...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
Are Schlage AL series products handed?
The AL series product line does not use any parts that requires prior knowledge of the door handing.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued

Support by product