Category: AL Series - Discontinued

(Results from 11 to 20)
Can you get any "AL" Series lever with tactile?
The Saturn lever design is the only option for tactile on the AL series lock. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
When the 11-105 circular drive-in latch is specified with a lock is the 10-058 circular strike included?
The 10-058 circular strike is not provided when the 11-105 circular drive in latch is specified.  Both the strike and latch must be specified on the order. ...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What AL lock lever designs will accept interchangeable cores?
The Jupiter (JUP), Saturn (SAT), and Neptune (NEP) lever designs can be prepped for FSIC or SFIC.  The Omega (OME) design cannot accept FSIC or SFIC.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
Is the lever part number the same for the AL series prepped for FSIC core prior to 2003 and after 2003?
The 51-022 is the correct part number for FSIC levers prior to and after 2003....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
What is the base material for the 10-025 and 10-072 strikes?
605, 606, 609, 619, 622, 625, 626, 626AM and 643e strikes use brass as the base material.   612 and 613 strikes use bronze as the bass material.   629, 630 and 630AM use stainl...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Why does shaking the outside lever unlock my AL70?
If AL70 is not timed properly, it is possible to shake the outside lever and unlock the lock.  To test whether the AL70 is timed correctly, insert the key into the outside cylinder.  Yo...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued
Are the drive in latches used the "A" and "AL" series UL listed?
The Drive in latches 11-110, 11-113, 11-104, and 11-105 used on the "A" and "AL"  will NOT be UL listed. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial
When ordering the Schlage Series Locks with a large format core how is the core pinned?
If nothing is specified the cores will be pinned 1 bitted....
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
What is the XC03-069?
The XC03-069 cannot be used with a Grade 2 cylindrical lock such as the AL-series or A-series. The XC03-069 will not fit into the chassis and latch retractor on the AL and A-series....
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Is the A710-011 or A710-012 still available?
The A710-011 inside spring cage and A710-012 outside spring cage were used on AL's prior to May 2002, no longer offered.  A710-011 replace with A100-053, will require other componen...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued

Support by product