What lever designs did Schlage offer on the A and H locks?
The Schlage A series (cylindrical lockset) and H series (interconnected lockset) were primarily knob locks, but they had a limited number of lever designs available. Most of these lever designs ...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued
What is the part number for the latch adapter used with 1" face plates for 1-1/8" prep?
Schlage offers a face plate adapter to adapt 1" face plate to 1 1/8" door
preparation, part number is A501-878.
...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
What is a bent tab strike?
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/mold...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
What does the S or D indicate after the lock function on Schlage locks?
Prior to July 2021, many Schlage lock part numbers included an S or a D following the function number or the cylinder suffix. Examples:AL10S, A40S, ND44S, S10S, etc. ND53PD, A70P6D, S280RD,...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series
What cylinder options are available with the Schlage A series?
The cylinder options available for the Schlage A series are:P6 - Conventional 6-pin cylinderP - Conventional 6-pin cylinder, keyed 5Z - Everest SL Conventional Cylinder, 7 pinL - Less conventional cyl...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued