Category: W Series

(Results from 41 to 50)
How do I specify the small rose on a W lock?
In order to differentiate the small rose offering from the standard W lock, add (SR) to the beginning of the lever style.  For example, to order a W501PD with a small rose and...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
When was the Falcon W Series launched?
The Falcon W-Series was launched in April of 2006....
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
What are the W lock lever and knob dimensions, including lever return?
Please see the attached document for all W Lever and Knob and Rose dimensions....
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
Can you mount W12's back to back?
The Falcon W12 single dummy lock cannot be mounted back-to-back to create a double dummy.  There is no access to surface mount the screws and the lever is held in place by a roll pin wh...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
Which lock replaced the Falcon S lock?
The Falcon S lock was replaced by the W lock (knob series).     ...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
Did the W501 lock operation change?
Changes to the Falcon W501 latch offering were made on 2/13/2012.   Prior to 2/13/2012: The W501 entry lock was supplied with a restoring latch which causes the button to pop and unloc...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
When a Falcon "W" lock is ordered in 622 are all components 622?
Lever, Roses and plugs (A or G Keyway) will be supplied in 622 (other section plugs will be supplied in 606).The latch and strike will be supplied in 613Any function using button- button will be suppl...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
What is a bent tab strike?
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/mold...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Are the Falcon W series available with a Schlage Full Size Interchangeable core prep?
The Falcon W series cannot be ordered with the Full Size Interchangeable Core prep. See below for available cylinder suffix's for the Falcon W series.P Conventional 6-pin cylinder, keyed 5P6 Conv...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series
What lever styles are available for the Falcon W18?
The W18 is only available in Dane and Quantum lever styles. ...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series