Category: T Series

(Results from 71 to 80)
Is the new Falcon T Series latch compatible with all available T lock strikes?
The new Falcon T-Series latch, introduced mid-June 2013, will work with all available T lock strike options.  No changes have been made to the strikes....
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Will the new T Series chassis work with the old T latch?
The new chassis, introduced in mid-June 2013, is fully compatible with the previous style latch and the new one launched at the same time....
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Will the old T Series chassis work with the new T latch?
The new latch, introduced mid-June 2013, will NOT fit into the previous T lock chassis.  Customer are encouraged to order a new Falcon T lock.  If needed, customers can replace the older lat...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
How do I identify the old Falcon T lock chassis versus the new T lock chassis?
The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first tw...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What are the part numbers for the new Falcon T latches?
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number    ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
How do I identify the old Falcon T lock latch from the new T lock latch?
For T locks shipping mid-June 2013, the new latch can be identified by viewing the deadlatch profile. The profile of the deadlatch has changed from a "full moon" to a "half-moon". See figure below. &...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Does the Falcon T series cylindrical lock have a tactile lever option?
A tactile warning adhesive strip is available on the Dane, Quantum and Avalon lever styles only. To specify, use the number "6" at the beginning of the design code. Ex. 6DA for DANE, 6QU for Quan...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What are the differences between the Falcon T series ANSI Strikes?
The difference between the two available Ansi Strikes for the Falcon T series is the lip length. Both ANSI Strikes are 1 ¼" x 4 7/8" Falcon Part Number 005161-000 is ANSI 1-1/4" x 4-7/8" wi...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
When the Falcon T series is ordered less cylinder, what tailpiece is supplied with the lock 6 or 7 pin?
By default when the Falcon T series is ordered Less cylinder (conventional), the 6-pin tailpiece will be provided. ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the correct wiring pinout on the Molex connector that comes with the electrified T series with the Con option?
Click here for the pinout diagram, which is looking at the FRONT of the connector, the wires would be coming through the opposite side of the image shown. ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series