Category: T Series

(Results from 61 to 70)
What are the differences between the Falcon T series ANSI Strikes?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The difference between the two available Ansi Strikes for the Falcon T series is the lip length.&n...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the correct wiring pinout on the Molex connector that comes with the electrified T series with the Con option?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Click here for the pinout diagram, which is looking at the FRONT of the connector, the wires would...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the tailpiece orientation for the Falcon T series using conventional cylinders?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. For proper function of the lock, the right tailpiece must be used and installed correctly. All T-l...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Is the 031416-000 solenoid and 030716-001 clutch driver still offered?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. As of March 2022 the T851 solenoid 031416-000, and T851 clutch driver 030716-001 are no longer off...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is needed to convert a Falcon T series from KIL to FSIC?
To convert a Falcon T series from FSIC to SFIC you will need to replace: Spring cage spindle -requires disassembly of the spring cage Lever Driver/tailpiece ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the maximum wire run length for T881 and T851?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. For the T881 and T851 wire run lengths. You can reference the chart for the ND series here....
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the rose diameter for the Falcon T series?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Falcon only offers one size for the rose on theT series, the rose diameter that is 3.45"...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the projection of the T351 inside knob?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The projection of the T351 inside knob from the face of the door is 2-1/8"  ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Why does the T561 unlock when the lever is rotated up?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. If the T561 unlocks when the lever is rotated up, there are two possibilities:The tailpiece is ins...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the Falcon T561 function?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Classroom Lock - Outside lever locked or unlocked by key. Inside lever is always unlocked and alwa...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series

Support by product