What is the 022558-000-70?
DISCONTINUED: The Falcon T lock had a reinforcement kit for a 1 3/4" thick hollow metal door that prevents lateral movement of the latch. It is a piece of hard foam shaped like a doughnut th...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Why is the push button rigid on the T571?
When the T571 is locked by the key, the inside push button will not push in (will be in rigid state). Push button remains rigid and inactive until the T571 is unlocked by key. ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What are the Falcon T lock electrical requirements?
Prior to June 2011 the T lock only supported 24V and the electrical requirements were as follows:
0.185 amp @ 24VDC
Wire Gage 22 AWG
See wiring diagram here - (Previous 2 wire version)...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What parts are needed to install a T lock on a 1 3/8" door?
If the lock has not been ordered then specify a door thickness of 1 3/8" and a shim kit will be provided to allow installation on a thin door.
If the lock has already been ordered then order the...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Where can I find timing instructions for the Falcon T lock?
To verify the timing on a T561, function test the outside lever after locking it.
To lock the key should only rotate 180 degrees (Not 360 degrees as Schlage does)
A prop...
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is a keycam?
A keycam is a sub component inside a cylindrical chassis (such as AL or ND) that provides the interaction required to lock and unlock the chassis....
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series