Category: T Series

(Results from 31 to 40)
Does the IC lever for the Falcon T series have a hole for the lever catch?
There is no lever catch hole on any T series prepped for IC cores whether it is SFIC or IC competitor prep. To remove the lever on a T series Falcon lock with IC lever prep, you will have t...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the Falcon pressure release lever?
The pressure release clutching-type lever is a standard feature for Falcon T and K Series. It disengages when locked to protect internal lock components from excessive force.  Click here for...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued
What are the Falcon T series cylindrical lock lever dimensions?
Please click here to see the dimensions for the Falcon T series lever dimensions.You can also see the Falcon Catalog by clicking here, and go to page 14.Note: Return to door meets 1/2" requirement for...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the length of the conventional cylinder tail piece for T series?
The length of the conventional tail piece for the T series locks, depends on the cylinder pin count and function. All functions except T381 inside & T571.5 & 6 Pin cylinder -  length...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
How to wire the T851 or T881 for 12vdc or 24vdc.
Falcon T series wiring for 24 vdc: The black and blue wire should be tied together. the Red and White leads should be connected to the power source as shown below. ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Is the Falcon T101 outside spindle available as a part sold separately?
The outside spindle for the Falcon T101 passage set is part number A30906-000.  It is available as a part sold separately.  The A30906-000 can also be obtained by ordering the complete inser...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
When ordering a Competitor Conventional cylinder for Falcon T will it Fit the standard L prep?
When using a Competitor Cylinder, the A23166 (Sargent LA Keyway) for example. The cylinder will fit into the L prep lever rather than using a lever designed for the Sargent 6,7 and 10 line. (Example 0...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the 1388 Hex wrench for Falcon T series locks?
The Falcon T lock ships with a plastic 1-7/16" hex wrench (internal part number 030701-000).  See picture.  It is used to tighten and/or remove the flange nut on the Falcon T series chassis....
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the Minimal Stile requirements for Falcon Locksets?
...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
What is a cylindrical lock?
Cylindrical Locks: a bored lockset whose latch or bolt locking mechanism is contained in the portion installed through the cross-boreMedium, high to extra heavy dutyCommercial, multi-family and instit...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series

Support by product