Category: T Series

(Results from 21 to 30)
Is the T851 electrified lock field selectable from 12 to 24 volts?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The T851 is not field selectable by a switch but can be wired to operate from 12 to 24 volts, plea...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What are the differences between the Q330-270 and the Q330-271 springcages?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series.  Q330-270- T Lock Spring Cage Kit (Inside for T411 and outside all functions except T101, T29...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Is the Falcon T series windstorm rated?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series.The T Series is only Hurricane rated, not rated for Tornado....
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
Is there a list of small Format Interchangeable Core tailpieces for the Falcon cylindrical locks?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. See below for the part numbers for Small Format Tailpieces for Falcon cylindrical locks.Falcon T s...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued
Does the IC lever for the Falcon T series have a hole for the lever catch?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. There is no lever catch hole on any T series prepped for IC cores whether it is SFIC or IC co...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the Falcon pressure release lever?
The pressure release clutching-type lever is a standard feature for Falcon T and K Series. It disengages when locked to protect internal lock components from excessive force.  Click here for...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued
What are the Falcon T series cylindrical lock lever dimensions?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Please click here to see the dimensions for the Falcon T series lever dimensions.You can also see ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the length of the conventional cylinder tail piece for T series?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The length of the conventional tail piece for the T series locks, depends on the cylinder pin coun...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
How to wire the T851 or T881 for 12vdc or 24vdc.
Falcon T series wiring for 24 vdc: The black and blue wire should be tied together. the Red and White leads should be connected to the power source as shown below. ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series
What is the 1388 Hex wrench for Falcon T series locks?
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The Falcon T lock ships with a plastic 1-7/16" hex wrench (internal part number 030701-000).  ...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series

Support by product