Do Ives 5BB1 hinges have the UL mark applied to them
Ives 5BB1 and 5BB1HW (Steel and Stainless Steel) hinges are listed with UL to UL10C under R16697.
These hinges are available with the UL mark.
These hinges are compliant with NFPA
...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the 5BB1 available with HT and NRP?
The 5BB1 HT has a non removable pin standard. Only the HT option needs to be specified....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is there an XY thru wire panel for 224XY hinges
While HGPART.1159 XY Removable Thru wire panel will work with the 224XY hinge, the leafs are not the same size. The following parts were created for the 224XY hinge:
HGPART.1184 &nbs...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can you use Cam Lift Hinges with Von Duprin EPT
The Von Duprin EPT-2, EPT-10, and PNT-1 will work with cam lift hinges with a maximum lift of 1/4". Depending on opening conditions, the door can open to 180° without binding or stress....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » System Components » Power Supplies » EPT Series » Von Duprin
What is the minimum length to which an XY hinge can be cut?
XY hinges can be cut to a minimum length of 69 inches. However, the hinge must be cut from both ends. For example, a 119-inch hinge can have 25 inches cut from each end to make it 69 inche...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Do we offer HT on 3SP1?
Ives does not offer Hospital Tips (HT) on the 3SP1 Spring Hinge....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Will a Glynn-Johnson 106 work properly with an Ives 041XY swing clear hinge?
041XY is approximately comparable to the 4.5" swing clear butt hinge. The angle of opening might be a degree or two less when using the 041XY because the pivot point along the gears is a ...
Schlage Commercial » Mechanical Accessories » Holders and Stops | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives