Category: Ives

(Results from 61 to 70)
To what degree of opening can 112 and 224 aluminum geared continuous hinges open?
The 112XY and 224XY open to 180°.  The 112HD and 224HD may open to slightly less than 180 degrees due to variations in tolerance....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Are Ives hinges available in a 621 finish?
There are no Ives hinges available in a 621 distressed nickel finish....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Are preps for other manufacturers' power transfers available on Ives continuous hinges?
Yes, at an additional charge, as an engineering special with extended lead times....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Can the 7215 pivots on door be held at 90 degrees consistently?
If the pivot is correct for the opening and has been installed properly, there should be no issue using 7215 pivots on a door held open at 90 degrees most of the time. Please reference...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can a Bar Coordinator be used with Offset Pivots?
There is a small chance that this combination could work, but it often does not work properly. Because of the location of the pivot point, the active door lever of a Bar Coordinator (COR32, COR4...
Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators » Ives | Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can a hinge pin door stop be used with the 3SP1 spring hinge?
The 3SP1 commercial spring hinge does not have a hinge pin design that will accommodate a hinge pin door stop. Please note: hinge pin door stops are intended for use in residential applications....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Mechanical Accessories » Holders and Stops » Ives | Schlage Commercial » Ives
Why is my TWP narrower than my XY hinge?
The TWP is a standard size across the board on continuous hinges....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the material thickness of the 112HD thinner than the 224HD?
No, they are both the same gauge....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the 705 pin and barrel continuous hinge furnished with Adjusta-studs?
Yes, this is the only hinge that ships standard with Adjusta-studs and corresponding machine screws.  It also ships with self-drilling self-tapping screws if Adjusta-stud method of installation i...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Can the pin of an Ives residential hinge be removed?
Yes, the pin can be removed, but it is discouraged. The pin has a textured section that keeps the pin from rising during use, this also makes the pin difficult to remove. Removal requir...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Residential » Door Hardware » Ives