Category: Ives

(Results from 51 to 60)
What is the part number for the TWP for Ives 224HD continous
840738-00  TWP X 6' Power Cable Kit (contains the Left hand and right hand ribbon cables as well)  ...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
What is the maximum degree of opening for Ives 5BB1/5BB1WT/5BB1SC hinges?
Assuming there are not obstructions, the door will open 180 degrees when using this hinge. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Are Butt hinges sized in the format "height by width"?
Yes. An Ives 5BB1 5" x 4.5" will be five inches tall and have a width of 4.5"...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial
When are Adjustable Studs needed for use with the Ives 705 hinge?
The adjustable studs (or Adjusta Studs) that come with the 705 hinge are usually used when the frame is not true and plumb or if the door was undersized too much.  The 705 hinge has overlapping...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Where is the pivot point located on a 041XY hinge?
The pivot point is located approximately 1/2" off the face of the frame and approximately 2" from the edge of the door....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives
Does Ives make a frameless, overlay hinge?
Ives used to make a frameless overlay hinge sold under "hobby hardware".  Ives does not offer such a product anymore.  ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can a Pin & Barrel Continuous Hinge be cut to size in the field?
Many 600 and 700 Series Pin & Barrel Continuous Hinges can be cut down in the field following the steps provided in the installation instructions to cut the bottom of the hinge. For a small ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
What is the High Security Stud (ST) option for Ives Butt Hinges?
Some Ives Architectural Butt Hinge templates reference a High Security Stud (ST) option which has separate templates. The ST option has a pin and hole on each leaf that when the 2 leaves are clo...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Does Ives have a drop leaf hinge?
Ives does not have drop leaf hinges. ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
To what degree of opening can 112 and 224 aluminum geared continuous hinges open?
The 112XY and 224XY open to 180°.  The 112HD and 224HD may open to slightly less than 180 degrees due to variations in tolerance....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Ives