Category: Ives

(Results from 41 to 50)
What is maximum width, height and weight for IVES butt hinges?
Butt hinges can be used on  doors up to 4' wide and 200 pounds.  There is no maximum door height.  However, an additional hinge must be installed every 30" when exceeding a 7' door...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the 224HD available with hospital tip?
 The HT (hospital tip) option was discontinued in October of 2017.    The hospital tip option is available on the 224XY hinges....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the Ives hinges available without screw holes?
Ives hinges are not available without the screw mounting holes....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
What mounting group do I use if I have a 100 overhead with a 3" thick door on center hung pivots?
No special template is required, use mounting group 3 for center hung pivots.  The door thickness does not matter on center hung pivots since the centerline of the pivot and the centerline of the...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can intermediate pivots be used to hang a door?
Intermediate pivots be used to hang a door but most of the weight is carried by the bottom pivot as each intermediate pivot can only carry 90 pounds.  ...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the Ives 7226 pivot handed?
The top and bottom pivot is not handed but the intermediate pivot would be handed....
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is the ribbon cable replaceable in the 112HD/224HD TW8 hinges from Ives?
The TW8 x 6 feet cables are available. Left hand is 841191-00 Right hand is 841190-00 You will need one of each as they are handed...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can the 3SP1 be used on a 8' fire rated door?
The Ives Architectural Hardware Products Catalog states for the 3SP1 hinge;Maximum door weight 120 lbs, max door width 36"Maximum labeled door size - 3'0" wide x 7'0" x 1 3⁄4" thick as set in NFPA 8...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Can a 1 1/2" offset pivot be used with a 410 holder / stop?
If the degree of opening is not critical, then use mounting group 1 and the degree of opening will be a few degrees less than the templated degree of opening.  If it is critical, then a special t...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Is hospital tip an available option for aluminum geared hinges?
Hospital tip option is available for aluminum geared hinges.  Photo 1 and Photo 2...
Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives | Schlage Commercial » Mechanical Accessories » Stops, Bumpers & Silencers » Ives

Support by product