Will Schlage make a cylinder in another vendors keyway?
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G,...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
Can the Schlage L or LP section key blank be cut in the field?
Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key.&n...
Schlage Commercial » Key Systems » Keys » Keys » Schlage
How are interchangeable cores installed?
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an inte...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Schlage | Schlage Commercial » Falcon
What is an SC keyway?
ILCO is a manufacturer that uses SC as a designation to represent Schlage keys. ILCO is not affiliated with Schlage so a key with an SC designation was never manufactured by Schlage.
The following...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What is the difference between C and E keyway?
The profile or shape of the key is different. This would apply to all key sections with differing names such as F, CE, etc....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage