Category: Falcon

(Results from 41 to 50)
What is the Schlage or Falcon equivalent to the Corbin Russwin A02 cam?
The Corbin Russwin A02 cam is the same as the BEST 30 Latch function cam or the Schlage and Falcon straight cams....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is a Falcon standard A cam?
Some Falcon exit device literature references a Falcon standard "A" cam.  This is another designation for the straight cam.  Part Numbers09897-000-00 - for standard (Non-IC) cylinder.&n...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What emergency key do you use for falcon MA hotel cylinder housing with SFIC construction core?
When the Falcon MA451 is ordered with SFIC construction core the emergency key would have to be ordered separately. Cut key part numbers:KB738-1 6PinKB738-2 7Pin Please provide part # and th...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Key Systems » Keys | Schlage Commercial » Key Systems » Keys » Keys | Schlage Commercial » Key Systems » Keys » Keys » Falcon | Schlage Commercial
What are the cylinder dimensions for a Falcon MA mortise lock?
Dimensions are dependent on the type of cylinder going into the lock.  Type of trim (rose/sectional vs escutcheon) does not impact cylinder dimension in Falcon MA.  For 5 or 6 pin conve...
Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Can the KR914-IC be ordered from Falcon Exits with a master keyed core?
No, cores, especially master keyed cores, have to be ordered from Schlage or Falcon cylinders  via their master key system....
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is the Falcon 50-210 Part Number?
The 50-210 is a Keying Charge that applies to Master Keyed Cylinders except Interchangeable Cores....
Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Falcon
What is Falcon part number 1397 cam kit?
Cam staking fixture designed for attaching or removing cams on the back of Falcon Interchangeable Mortise housings. Instructions can be found by clicking here. ...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
What is the M540-056?
The Schlage M540-056 is a cylinder cap removal tool. It is designed to facilitate cap removal and assembly when re-pinning or replacing tailpieces on Schlage and Falcon KIL cylinders or Schlage Full...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is the tailpiece orientation for the Falcon T series using conventional cylinders?
For proper function of the lock, the right tailpiece must be used and installed correctly. All T-locks with standard cylinders must have the tailpiece installed VERTICALLY. Please click below for...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » T Series » Falcon
Are the Falcon and Schlage KIL cylinder plug faces the same size?
The dimensions on the Falcon and Schlage KIL (Key-in-Lever) plug faces are not the same.  Falcon KIL is .620 - .625 Schlage KIL is .608 -.612 ...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon

Support by product