What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blocki...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can I get the RU series with a Schlage Full Size Interchangeable core?
The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock.
Example: RU581J IC-SC...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » RU Series - Discontinued
What type of cylinder is the 20-001?
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the part number for a key in lever tailpiece for the ND lock?
For modular designs:
All functions except ND85 the tailpiece part number is N523-022.
The ND85 tailpiece part number is N523-123.
For non-modular designs:
All functions except ND85 the tail...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
How is a bitting list obtained?
A purchase order must by entered through Order Entry.
Part number 50-123 for Schlage and 50-123F for Falcon.
Reference the structure number (preferred) or an order number...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Schlage
Does Schlage make a Profile cylinder?
Schlage does not make profile cylinders. Allegion's CISA makes profile cylinders. Contact Allegion UK at http://www.allegion.com/uk...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the part number for a control pin for a 23-030?
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) &n...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage