What is the maximum door thickness a Rim cylinder can fit on?
For total thickness measurements larger than 3 inches see the special cylinder offerings in the Schlage Pricebook. Specify the part number and include the total thickness. We do not o...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Falcon
What is the difference between C and E keyway?
The profile or shape of the key is different. This would apply to all key sections with differing names such as F, CE, etc....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
Is there a cylinder that can trap a key?
This product was available until 2001 when it was discontinued.
Part Number
Description
XB09-728
Entrapment mortise cylinder, P keyway
XB09-834
Entrapment rim cylinder, P keyway
X...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What would cause a key to get stuck in a cylinder?
Check the following:
Debris in the cylinder
The cylinder cap could be too loose
Incorrect pinning of the cylinder
The cylinder plug is not returned to the neutral position with the cylinder she...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is the length of a Schlage rim cylinder?
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is a modular cylinder?
Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage
What type of cylinder is a 20-022?
Both cylinders are standard non-ic rim cylinder.
20-022 has a horizontal tailpiece
20-021 has a vertical tailpiece...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
Will Primus cylinder fit into the F locks?
The Primus cylinders are not designed to fit into the F locks. They are too long and the tailpiece is oriented differently....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage