Category: Von Duprin

(Results from 71 to 80)
Can you use the 925 tubing from LCN for the PN Von Duprin devices?
If using the LCN pneumatic control box as the air source for the Von Duprin Pneumatic devises then you have to use the LCN 925 tubing because of the size of air line fitting on the LCN contr...
Schlage Commercial » Door Controls » Automatic Operator » 7900 Series » LCN | Schlage Commercial » Door Controls » Automatic Operator » 7980 Series » LCN | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Do we offer HD-QEL?
We offer a couple different HD-QEL options:Hex key dogging (HD) is now available with Von Duprin non fire rated QEL33A/35A/98/99 electric exit devices that were shipped after Decem...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Is a Von Duprin or Falcon EL device available in 12V?
 Electric latch retraction, EL, devices are only available in 24VDC.  (Note: The EL option for 24/25 series and related service parts have been discontinued as of 7/25/2022)...
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Do we have instructions on how to clean an exit device?
Recommendation is to use mild soap with a damp cloth to clean an exit device....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Can you order the 996 lever only if they want to switch from a #06 design to the # 07 design?
You can switch the lever from 06 to 07 design on 996L trim.  Order the 050737 for an active lever and 050007 for fixed and specify the finish....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the difference between Von Duprin LX and/or RX switches and the Signal Switch SS option?
The RX monitors the push bar while the LX monitors the latch bolt of the exit device. A SS device has an LX and a key cylinder switch plus an emergency push bar signage....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the hydraulic fluid damper on the 99 device?
Fluid damper makes the push bar to release slowly to cut the noise....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What took the place of the Von Duprin 873-DE option board?
The delay egress is controlled in the exit device (Von Duprin Chexit), the magnetic lock, or other locking device....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
What parts are necessary to add the bottom rod/latch/strike to a 98/9927-LBR/LBR-F (less bottom rod) device?
Following parts are required to add the bottom rod and latch to the 98/9927-LBR/LBR-F device.  Bottom Rod: 050515 for 9827 and 050514 for 9927 (specify finish)  Bottom Latch A...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Why is my cylinder retracting the latch on my 99L device?
The NL screw may still be installed in the center case cam, remove the NL screw per the attached instructions.   98/99 device function for trim...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin