Category: Von Duprin

(Results from 51 to 60)
Can the 9927 exit device be installed Less Top Rod?
The top rod is required for proper operation.  The top latch controls both the top & bottom rods and without the top latch/rod the bottom latch would release when pushpad or trim was used but then dr...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Is the 871-2Q board required on QEL devices when using the PS 873 AO to operate my QEL devices?
The QEL exit devices that were shipped prior to August, 2012 will only communicate to the PS873 with 871-2Q option board or PS900 series with 900-2Q option board. If you ar...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Is there a Von Duprin delay egress Chexit conversion kit?
There is no conversion kit for Von Duprin Chexit device.  If delayed egress Chexit device is required, the entire device must be replaced....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Is there a EL conversion kit for the XP98?
Standard EL Conversion kits will work on the XP devices.050070-00 for 3' and 050078-00 for 4' device....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
When using a 9927 and you have a flush transom above is there a bracket to mount the latches to?
When using 98/9927 with flush transom above: You will need to use a 260U strike for flush transom applications OR a 260U-F strike for 98/9927-F fire rated device....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Can 2227F devices in an existing opening be converted to LBR?
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the difference between normally open and normally closed?
In a push button type switch (RX or LX), in which the contacts remain in one state unless actuated, the contacts can either be normally open (abbreviated "n.o." or "no") until closed by oper...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Von Duprin
What are the box dimensions for the Von Duprin DE 5101 ?
The box dimension for DE5101 is 5.57" W x 3.75" T x 2.50" D....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Can I use CD and ALK on a 98/99 series Von Duprin?
Standard 98/99 exit alarm ALK devices are available with cylinder dogging option as of October, 2011. The device can be ordered standard with cylinder dogging and exit alarm ALK option ...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Does Von Duprin offer an exit device for exterior use?
Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish and m...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin