Category: Von Duprin

(Results from 81 to 90)
Von Duprin 230L Trim Redesign
As previously announced, Von Duprin 230L trim used with the 22 series device has been redesigned with modifications to the lever assembly. -      Complete Marketing Bul...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin
How far does the 22 series center case cam have to rotate to fully retract the latch bolt?
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin
What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones.  The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Why is the 110NL cylinder assembly required with Von Duprin 22 and 98/99 series device NL-OP applications?
These applications use a rim cylinder, and a normal rim cylinder anchor plate that would be affixed to the push side of the door would interfere with the operation of the master cam on the back side o...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Is the latch mounting bracket included in the 2227, 33/3527A, and 98/9927 latch kits?
The 2227, 33/3527A, and 98/9927 latch kits include only the latch and mounting screws, not the latch mounting bracket.  The latch mounting bracket can be purchased separately using part num...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the difference between the Von Duprin standard baseplate return spring package 090039 and the LBR (less bottom rod) baseplate return spring package 090088?
Current baseplate spring 090039 Used with 2227/27-F, 33/3527A/27A-F, 98/9927/27-F (Standard and LBR) May be used for all standard and LBR devices produced after 1995 Was redesigne...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What Von Duprin Allegion Connect products and combinations are available?
Von Duprin Allegion Connect Options and Combinations...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Is the Von Duprin 22 mechanism case sold as a service item?
Von Duprin does not sell the 22 mechanism case as a service item. ...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin
Is the Von Duprin 2227-F device approved for use on single doors?
The 2227-F device's UL fire label covers pairs of doors only....
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin
Will a 914 KIL trim work with a 22 series device?
The 914-KIL lever trim works with the Falcon (formerly Monarch) 19 Series Exit Devices..The mounting posts do not line up with the 22 Series Exit Devices.....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Glossary » Exits