What cylinder is used for the Falcon CD 24/25?
The Falcon cylinder dogging(CD) option requires a 1 1/8" Mortise cylinder with a straight cam similar to a Falcon #24 cam for conventional cylinders....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
Can the EL solenoid be replaced in the former Monarch 17/18 devices?
It can but the solenoid will need to be purchased through New England Door Closer as the factory discontinued the old ELR solenoid (part #650092-000) in June 2010....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What is different about the updated Falcon Exit Alarm (EA) option ?
The Falcon Exit Alarm option was updated in June 2012 to include the following benefits.
Louder Alarm 95dbs vs 87dbs
Easier battery changes
24Vdc hardwire(HW) option included w/ s...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the AX option available for Falcon 25 series devices?
The Falcon AX option is available on a limited number of Falcon exit devices and has a $19 list add. To receive an AX device that requires only 5 pounds of force to operate please specify the AX pre...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can the Falcon 511L trim be converted to a 511L-NL trim?
The 511L-NL is not an official product offering. The 511 is a vandal resistant classroom function only trim.
That said, the procedure and the parts for the conversion would be similar to th...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can the 718C be used with 25 Series devices?
The 718C is compatible only with the 24C or the 25C device.
It cannot be used with any other device from the 24/25 Series.
See here for installation instructions.
Requi...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Glossary » Exits