Will a 25R-L cover the door prep from a 18-R-L?
The (4) center case mounting holes are in the same location but there are some small modifications that will be needed like the 3/4" dia. hole at device CL for the main cam clearance shown on t...
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can the Falcon 25-V be cut to fit on a 2' door?
The standard Falcon 25V vertical rod cannot be cut to fit on a 2 feet door opening. This device requires 2' 7 1/8" minimum door opening. Falcon offers a device that can be used on a 2 feet door o...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Where is the template for the 25C NL-OP?
The NL-OP function for 25-C uses the 718C trim, so template T-2211 for metal doors and W-2211 for wood doors for 718 trims prior to 2/28/2011.
T-2211 for trims prior to 2/28/2011
W-2211 for tr...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the AD lock work with the 25-R?
The AD200 or AD250 will work for the 25-R device only....
Schlage Commercial » Electronic Locks » Offline » AD 200 Series | Schlage Commercial » Electronic Locks » Offline » AD 250 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can you field install a RX switch on the 24/25 device?
The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX switch...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can you get a 511L as a NL?
This is not an available option. Making the lever rigid(NL/DT) defeats the breakaway feature. The lever must be active to lift the the lift block to compress the springs for the VR function to&n...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can the RX Retrofit kit for the 24 or 25 series work in the 17 or 18 series devices?
The RX switch kit mounts into the push pad of the 24/25 device which is different than the older 17/18 push pads. We no longer have an "AE" switch kit available for the 17 or 18 devices whi...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon