How do you test a Falcon 24 or 25 Series EL solenoid?
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, shou...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the 18-V top latch work with a 25-V device?
Yes, the top latch for the 25-V carried over from the 18-V device.
Surface vertical rod top latch = part #650389 or #650375(fire rated)...
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Where can I find the 24/25 series catalog?
http://monarchhardware.com/pc_catalogs_series2425.asp...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the 25-C series rods and latches work on the old 18-C?
The internal rods and latches for the 25-C carried over from the older 18-C device so they can be used interchangeably....
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What is the part number for the EAK for my monarch 24/25 device?
Exit Alarm Kits are ordered by specifying device Series and size.
24-EAK-3 (part #650163)
24-EAK-4 (part #650164)
25-EAK-3 (part #650167)
25-EAK-4 (part #650168)...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Why does a 25 device come undogged when the door closes?
The dogging spring in the dogging assembly could be worn or broken or possibly the dogging pin on the device is bent towards endcap of device instead of being perpendicular with baseplate....
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the 24/25 device clear a glass bead?
The 24/25 device sits flush against door surface so the device would require shim kits. See Parts Manual, under 24/25 Series miscellaneous kits and parts, Glass bead kit (GBK), shim kits.&nb...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can the 6300 strike work with the 25-R?
This will work but requires a 579 shim kit from Falcon Monarch. See attached instruction sheet, 579 Shim Kit....
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » System Components » Electric Strikes » 6300 Series » Von Duprin