Category: Falcon

(Results from 41 to 50)
Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?
Installation should be 6" from bottom of the door. See attached templates as reference.  T-5494 for HM Doors W-5494 for Wood Doors...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Why would 24-R device pop open when jiggled back and forth?
If device backset is correct, replacing the device center case & center case cover with a F-24-R to add deadlocking to the latchbolt would resolve the issue. Parts to the F-24R center case &a...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
What is the part number for the EAK PCB only for Monarch Falcon devices?
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
How to identify a Monarch device model number?
The easiest way to id the devices is to use the Falcon Catalogs which will have a picture of the device on the front cover. The catalogs will also contain the device's overall dimensions for...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the new 712L work with old 17 series?
The 24 series & older 17 Series trims are compatible with each other....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
Will the Falcon 24 R with deadlocking accept the LM/DM switches?
This configuration is not possible as the anti-pick plate of a "DL" or "F" device center case interferes with the LM/DM switch mounted also on the center case. ...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
Can a 24-R, 24-V, 25-R, or 25-V device use just a cylinder on the pull side for NL-OP function?
This is possible.  A rim cylinder with cylinder anchor plate is used (anchor plate provided with rim cylinder package). No other special components are required. Order device as NL-OP.&nbs...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Does the 24 series have electrified trim?
There is no FSA/FSE electrified trim option for the Flacon 24 Series device....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
What cylinder is used for the Falcon CD 24/25?
The Falcon cylinder dogging(CD) option requires a 1 1/8" Mortise cylinder with a straight cam similar to a Falcon #24 cam for conventional cylinders....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
Can the EL solenoid be replaced in the former Monarch 17/18 devices?
It can but the solenoid will need to be purchased through New England Door Closer as the factory discontinued the old ELR solenoid (part #650092-000) in June 2010....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon

Support by product