Can the RG-27 be used with the Falcon XX/19/24/25-V?
The Von Duprin RG-27 will cover the surface vertical rods of the Falcon devices....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Do we offer a Dummy Touchbar for the 24 and 25 series devices?
The 250DT is a dummy touchbar for both the 24 and 25 devices. It is a dummy bar with end caps on each end, no center case....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
How do you test a Falcon 24 or 25 Series EL solenoid?
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, shou...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Where can I find the 24/25 series catalog?
http://monarchhardware.com/pc_catalogs_series2425.asp...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What is the part number for the EAK for my monarch 24/25 device?
Exit Alarm Kits are ordered by specifying device Series and size.
24-EAK-3 (part #650163)
24-EAK-4 (part #650164)
25-EAK-3 (part #650167)
25-EAK-4 (part #650168)...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the 24/25 device clear a glass bead?
The 24/25 device sits flush against door surface so the device would require shim kits. See Parts Manual, under 24/25 Series miscellaneous kits and parts, Glass bead kit (GBK), shim kits.&nb...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the 2126A bottom strike still available?
The 2126A strike was discontinued in 2009....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will the Falcon 24 EO accept any 24 series trim?
The 24 device will accept all 24 series trims. The 24 device has the main trim input cam on the centercase for the trims even on Exit Only(EO) devices....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
Do the Falcon exit devices have the double cylinder option?
A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon