Category: Falcon

(Results from 41 to 50)
What keyway comes with the Falcon 19-KIL?
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
Why will 912L not retract the latch bolt all the way?
There are a few things to check in the 912L trim is not retracting the latch  as expected.  If the 912L was shipped after February 28,  2011, Check the installation instru...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What replaced the Monarch 560 strike?
The F570 is the strike used in lieu of the 560 which covers both fire & panic applications....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?
Installation should be 6" from bottom of the door. See attached templates as reference.  T-5494 for HM Doors W-5494 for Wood Doors...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will a 7-pin IC core fit in a 914KIL-IC trim?
The 914KIL-IC is supplied with a 6 pin IC core but will accept a 7 pin....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What is the part number for the EAK PCB only for Monarch Falcon devices?
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
How to identify a Monarch device model number?
The easiest way to id the devices is to use the Falcon Catalogs which will have a picture of the device on the front cover. The catalogs will also contain the device's overall dimensions for...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is there an Exit Alarm Retrofit Kit (EAK) for the 19 series?
These kits for the 19 Series were discontinued June 11th, 2012 when the updated alarm kit for the 24/25 series was released.   Prior to discontinuation, it was  orde...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Can you put a 914KIL on a 2" thick door?
Currently, the 914KIL trim will only work on 1 3/4" doors....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What replaced the 910TP?
Nothing replaced the 910TP thumbpiece trim as it was discontinued in Feb 2011 as a trim offering all together....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon

Support by product