Category: Falcon

(Results from 21 to 30)
Is the dogging assembly for the 17/18 device still available?
The 17, 18, & 19 devices use the same dogging assembly part #610480....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
How can I cover a 86 or 161 prepped door with a 19-R?
The 4170 cover plate can be used to cover the 86 & 161 prepped doors....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What strike is used for in-active leaf on pair of doors with 19-R?
The 571 strike is used on the in-active door leaf of a pair or on the 19-V door leaf when both doors are active per template....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What is the new part number for 588-000?
The current part number to the 19-V top latch is 650389-00....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Can the RG-27 be used with the Falcon XX/19/24/25-V?
The Von Duprin RG-27 will cover the surface vertical rods of the Falcon devices....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What K hub will work for 19-R or 19V using a Simplex LP1010?
The LP1000 series Kabba Simplex trim will not work with the 19 series devices....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Will the 19-V series fit on smaller than standard stile width?
The 19-V will fit down to a 1 3/4" stile door per template T-1105. See chart in upper right corner of template. REDIRECT TO ALL TEMPLATES The 19-V will fit down to a 1 3/4" stile door per temp...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
How far down can you cut a 4' 19R?
The 4' (F) 19-R with standard F570 strike can be field sized to fit down to a 3'0" Door Opening Width per chart on page 18 of 19 Series Catalog....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Will a 914KIL or a 914-KIL-IC work with my older 19 series exit device?
The (2) mounting studs on the 914KIL or 914KIL-IC changed from 3 1/2" center to center to 4 1/2" CTC in April 2002 to follow a device center case change. Due to this, an older device prior to April 20...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Where are the part manuals for Falcon exits?
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the ...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Falcon