Can the EL kit still be ordered for the 18-V?
The ELR kit for the older 17/18 Series devices is no longer available. You would need to use current EL25-V device with PS914-2RS power supply....
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
Is the Athena trim from Falcon Monarch the same as Standard trim?
Yes, "Standard" was the old name for the sectional pull trim for the 18/XX devices and is now called Athena. The trim is the same, only a name change....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
What replaced the Falcon Monarch 17 & 18 devices?
Falcon Monarch 24 series exit devices replaced the 17 Series exit devices.
Falcon Monarch 25 series exit devices replaced the 18 Series exit devices....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Will a 25R-L cover the door prep from a 18-R-L?
The (4) center case mounting holes are in the same location but there are some small modifications that will be needed like the 3/4" dia. hole at device CL for the main cam clearance shown on t...
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Can you use a new 812L on an old bar that had a 182L?
The current 812L trim will replace the older 182L trim.
Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinder t...
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
Can the RX Retrofit kit for the 24 or 25 series work in the 17 or 18 series devices?
The RX switch kit mounts into the push pad of the 24/25 device which is different than the older 17/18 push pads. We no longer have an "AE" switch kit available for the 17 or 18 devices whi...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What replaced the Monarch 560 strike?
The F570 is the strike used in lieu of the 560 which covers both fire & panic applications....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Will the PS914 or PS873 replace the RDS-2?
This is not an option, the older RDS-2 was used with the older Falcon Monarch ELR devices. The power supply would apply 24VDC for 1 second then drop down to 5VDC for the remainder of hold...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Do we offer a RX switch for the 17 or 18 device?
This option is not available. The 17 & 18 Series devices were discontinued in August 2009 and the new Falcon RX Switch is mounted to a bracket that fits in the pushpad it...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon