What is the part number for the former F588 from Monarch?
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What is the conversion for Monarch BA?
In 2007 Monarch part numbers went through a conversion as described below.
OLD
NEW
DESCRIPTION
BA
EO
Exit Only, No Outside Trim
DT
no change
-
PULL ONLY
DT
Dummy Trim...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What would the 904H stand for on a Falcon Monarch exit device?
The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the Falcon RDS-2 power supply still available for the ELR devices?
The older ELR 17/18 device would have to replaced with a new EL-24/25 device and use the PS914 with either the 900-2RS or 900-4RL board....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
Does the AD series trim work on an 18 series exit device?
The Schlage AD Series trim is not compatible with the older 18 Series. See AD-Series Exit Trim Compatibility Chart for exits devices that will work with the AD trim....
Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
How do you convert 812L to a NL function?
The function of the 812L trim was determined by the device itself for a Rim or Surface vertical rod device. See the appropriate device instructions(link below) under the "Locking Fun...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
What is the dogging hex key size on the Falcon Monarch devices?
The hex dogging key size for all Falcon-Monarch exit devices is 7/32"....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What does BA mean when ordering a Monarch device?
"BA" stands for basic assembly or what is now referred to as Exit Only(EO)...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
Can we still supply the 812 L trim for the Monarch 18?
Allegion stopped manufacturing he 812L trims when the Falcon/Monarch XX Series crossbar devices were discontinued in 2019.The 812L trims had also been used on the Monarch 18 Series pushpad devices dis...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon