What is the conversion for Monarch BA?
In 2007 Monarch part numbers went through a conversion as described below.
OLD
NEW
DESCRIPTION
BA
EO
Exit Only, No Outside Trim
DT
no change
-
PULL ONLY
DT
Dummy Trim...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What would the 904H stand for on a Falcon Monarch exit device?
The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the Falcon RDS-2 power supply still available for the ELR devices?
The older ELR 17/18 device would have to replaced with a new EL-24/25 device and use the PS914 with either the 900-2RS or 900-4RL board....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon
What is the dogging hex key size on the Falcon Monarch devices?
The hex dogging key size for all Falcon-Monarch exit devices is 7/32"....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
What does BA mean when ordering a Monarch device?
"BA" stands for basic assembly or what is now referred to as Exit Only(EO)...
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
What are the 3 wires on the Falcon AE switch?
For 24/25 devices per instructions :
Violet - Normally Open
Black - Common
Gray - Normally Closed...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the channel end cap on the 17/18 the same as on the 24/25 devices?
The end cap for the 17/18 devices will not fit on the 24/25 devices due to the mechanism case being wider on the 24/25's. ...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon
Is the dogging assembly for the 17/18 device still available?
The 17, 18, & 19 devices use the same dogging assembly part #610480....
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon
If they need the alarm kit for the 17 or 18 series what can they do?
The older version of the circuit board for the exit alarm(EA) kit was discontinued in June 2012 and no longer available. You will need to replace the device with the 24 or 25 series with EA...
Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
Can the RG-27 be used with the Falcon XX/19/24/25-V?
The Von Duprin RG-27 will cover the surface vertical rods of the Falcon devices....
Schlage Commercial » Exit Devices » Cross Bar » XX Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 17 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 18 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon