Category: Falcon

(Results from 11 to 20)
Is CD an option for the Dor O Matic devices?
Cylinder Dogging(CD) is not an option on any Falcon-Dor-o-matic device....
Schlage Commercial » Exit Devices » Cross Bar » 1990 Series » Falcon | Schlage Commercial » Exit Devices » Cross Bar » 2090 Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
How is the 2390 changed from NL to Hold Back?
The function of the exterior cylinder is determined by the orientation of the cam on the back of the mortise cylinder. See step 11 of the 2390 instructions...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon
Do I need to know my desired centerline when ordering the Doromatic 2390?
This is a requirement.  See the Reference Notes in the Price Book as the rods are built to the centerline and door height stated when ordering. Measure from the muntin horizontal center...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon
Why is the 2390 top latch not staying retracted when dogged?
Most likely need to length the top rod so latch can engage it's internal latch retention state. See 2390 Instructions for adjusting rod lengths....
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon
Are any of the DOM exit devices rated?
Fire rated devices are not an option....
Schlage Commercial » Exit Devices » Cross Bar » 1990 Series » Falcon | Schlage Commercial » Exit Devices » Cross Bar » 2090 Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Is there an EL conversion kit for the Falcon 2390 exit device?
There is no EL conversion kit for a 2390, the device will need to be replaced....
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon
What size of 2390 replaces the discontinued 1390 device?
The 2390 is only available in two sizes, a  21"(overall 24.125" w/ endcaps) and a 24"(Overall 27.125" w/endcaps) unlike the older 1390 which could have been ordered to size. You would o...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Falcon
What is the part number for the dogging assembly for a 1690/1790/2390?
For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ord...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Falcon Glass Stop Discontinuation Bulletin 6-17-2014
Schlage Commercial » Exit Devices » Recessed » 2390 Series | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon
When the Falcon 2390 literature refers to "touchbar" length such as 21" or 24", does that include the device endcaps?
No, the length stated is the touchbar length only, not including the endcaps. The muntin length for the device is longer than the touchbar length.  Muntin size is shown in catalog and installatio...
Schlage Commercial » Exit Devices » Recessed » 2390 Series | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon

Support by product