Category: Von Duprin

(Results from 41 to 47)
Where is the fire label located on a fire rated mullion?
The UL fire label is at the bottom of the fire rated mullion.  The mullion also ships with a sticker which notes the bottom of the mullion should not be cut.  Cutting would remove the fire l...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Falcon | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin
How far does the 22 series center case cam have to rotate to fully retract the latch bolt?
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin
What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones.  The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What material are anchors for fire rated mullions?
The instructions for the 9954 confirm iron expansion anchors. ...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin
Is it possible to electrify an existing 4954 Von Duprin mullion?
Existing Von Duprin 4954 mullion can be electrified.  The conversion requires the KR54-F Retrofit Kit (Part 050169), the Female Wire Assembly (Part 105988), and the Male Wire Assembly (Part 10598...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Von Duprin
What is the size of the cylinder hole on a KR kit?
The diameter of the cutout is 1.25"...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin
What do I need to order to convert a KR4954 to KR4854 mullion?
The KR4954 has the same mullion body and most of the same KR kit parts as a KR4854 mullion.  However, the KR4854 uses the fire rated (9854/9954) top fitting components.  So these top fitting...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin