Category: Von Duprin

(Results from 11 to 20)
Is there a template for the 472U or 473U strikes?
No.  The 472U and 473U strikes are surface mounted on wood frames, so no template required....
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
Are the Von Duprin 55 series exit devices handed?
The 55 devices are handed, but they can be reversed in the field by following the reversing instructions....
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
Can the 264 strike be used with "insert exit device here"?
The 264 can be used with any device that the 299 can be used with....
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Explain why can't you use a 371L on a 5547L when you can use it on a 5547L-F?
On the 5547-F device both rods lift and on the regular 5547 device the rods move towards each other.  A 371L control trim lift the top rod, so it would not pull the top rod down on a regular 5547 d...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
How should a Von Duprin exit device be written out for ordering?
To order Von Duprin exit devices,  reference the "How to order" section in the Von Duprin catalogs. All Von Duprin device series Catalogs are available on website. Choose  "Catalog...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
How do I change the handing on my 7500 mortise lock?
You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the standard door height for the 5547?
Standard door height for 5547 exit device is 8 feet. ...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
Can a Von Duprin 7500 lock and device replace a Schlage L9000 series lockset?
While they are both mortise locks they are not interchangeable.  You would NOT be able to use a L9000 with a VD panic device. You would NOT be able to use a VD 7500 with Schlage levers...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Is the Von Duprin 55 rim device available as a Fire Rated exit device?
The 55 rim device is not available as a fire rated exit device. ...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
Can the E371LBE be used with a 5547-F?
The E371L-BE trim can be use with 5547-F device....
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Von Duprin

Support by product