Allegion

Current iButton Versions and Part Numbers

IBF (Black) OLD Old Standard Residential iButton Credential Read Only Chip Can Be Used Across Multiple Sites Note: Some previous versions of Locknetics or Schlage FOB's could be Dark Blue...

Schlage Commercial » Credentials | Schlage Commercial » Credentials » Ibutton | Schlage Commercial » Credentials » Ibutton » iButtons | Schlage Commercial » Electronic Locks » Offline » CM Series | Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » Cobra Series | Schlage Commercial » Electronic Locks » Offline » Cobra Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » King Cobra Series | Schlage Commercial » Electronic Locks » Offline » King Cobra Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » Multi-Family | Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » 101+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 101+ Series » Schlage Electronics | Schlage Commercial » Schlage Electronics

How do I unlock a BE367 or FE210 if the battery is dead?

If the BE367/SPED500/SPED1000 is completely unresponsive, i.e., if presenting a Pass-Through credential does not grant access, the mechanical key override must be used to retract the deadbolt....

Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics

Does Lock and Leave on a BE367 or FE210 work if the battery is Low?

If the battery is Critical (6.0 volts or below): the SPED will give the Critical Battery Warning (12 red LED blinks/12 beeps); the outside thumb turn will not engage, and the bolt cannot be extended f...

Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics

How to unlock a BE367 or FE210 when it shows the battery is Critical?

There are two ways, other than using the mechanical key override:Present a valid Pass-Thru credentialNo low battery warning or nuisance delay givenOutside thumb turn engages immediately; remains engag...

Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics

What do the BE367 LED signals mean?

BE367 / FE210 LED User Interface There is one red LED and one green LED to convey information to the user. The BE367 and FE210 will produce different LED flash patterns to indicate spec...

Schlage Commercial » Electronic Locks » Offline » Multi-Family | Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics

What credential types are compatible with BE467?

The BE467/FE410 does not support prox-only credentials....