Why does the Schlage Utility Software application display the error message "E201 - This device is not connected?"
The E201 message can be ignored and all normal SUS and lock functions will be maintained. Click "OK " and continue.
Update the Schlage Utility Software (SUS) to version 4.6.0 or higher.&...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
What drains the AA batteries on an CO-Series lock?
Causes for AA battery drain in CO-Series LOCKS - Possible Cause Fix/Corrective Actions
One of the four AA batteries was inserted reversed and the reserved battery drains the other batteries.
...
Schlage Commercial » Electronic Locks » Offline » CO 100 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?
Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable products.&...
Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
How does Privacy Mode work with Auto-Unlocks?
If the lock is NOT within an Auto-Unlock period when Privacy Mode is cancelled, the lock stays secured....
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
AD CO Fire Door Rating
AD / CO locks are fire-rated for 3 fire dors hours...
Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
Credentials with proper access rights in Schlage Express will not allow access to the lock.
Schlage Express allows for an activation and expiration date to be assigned to users in the software, The will restrict the there access regardless of credential out side of that time period If...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
right side red flashing led before green
coin cell battery (2032) is either low or the insulator has not been removed ...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
Why is my HHD not connecting to my AD lock?
5) If working with a CO lockset, the mechanical key switch needs to be in its "Inactive" or normal position. Ensure the triangle alignment on the front escutcheon and that th...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
What is the recommended Stile Size for AD and CO?
The minimum recommended Stile measurement is 5” to allow proper mounting of the AD and CO series locks....
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics