Why does an AD or CO lock get a low indication battery when installed?
Remove plastic insulator film from below the coin cell.
YOU MUST PRESS S1 TO REBOOT FIRMWARE - S1 located at 8 o'clock from IPB...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
How do I manually change PIN length on an AD200?
Beginning with Firmware Packages ADFwPkg 2.16.3 and COFwPkg 1.20.0 the PIN length can be manually changed for AD200 and CO200 locks as follows:
1. Press {programming code (default is 97531)} then {*}...
Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
Can I have multiple Hand Held Devices (HHD) coupled to the same lock?
The Coupling Password is compared whenever an HHD is trying to adjust lock configuration settings or downloading door programming files....
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
What type of torx screws are available with AD-Series and CO-Series locksets?
Seperate screw packs can be ordered for Cylindrical, Mortise or Exit (993) lock types. See attachment for kit Part Numbers...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
What are the dimensions of the 993 spacer plate underneath the CO 993 Trim?
13 1/2" Long, 3 5/8" Wide, 1/4" Thick...
Schlage Commercial » Electronic Locks » Offline » CO 100 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
CO / AD will not lock but proper LED indications are displayed for validated unlock
Check the key operation Rotate counter clock wise or clock wise, 120 degrees rotation should be observed for latch retraction in either direction. If the points of latch retraction are gros...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics