Category: Schlage Electronics

(Results from 1 to 10)
CDT with Firefox browser does not work
Current version CDT download link:  CDT v 3.04...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Can a PIM be pre linked as a backup Pim
Yes; but not recommended. ReLinking should always follow any hardware replacement.     if the pims were configured identically  channel /Unique id then separately linked to the same R...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
How do I make RS-485 connections?
Please see attached file and information for RS485 Best Practices.   Since the AD series uses a specific component for the RS485 communication, the following information is provided from t...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Frequency and Wattage of the Current AD Wireless Locks and Peripherals
What is the frequency and RF power that the AD Wireless Locks? Answer: The system is approved for frequencies between 902 mhz - 928 mhz. The 10 spe...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Readers that can connect to Legacy WRI
Any reader or keypad or combo reader/keypad will work on the WRI as long as it outputs less than 255 bits and outputs a Wiegand (data1/data0) or Magnetic (clock & data) electrical communication fo...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Prox reader sensitivity for WA Series locks
The WA 5200 and 5600 series have approximately a 4" read range. The WA 993 is less sensitive and generally around  1", occasionally a unit may only respond within 1/2". ...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Usable COM Port Range in CDT
...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
Will Manual Key Override Drain Battery on all models of WA locks?
Answers depend on the product configuration: WA 993 - Yes it will drain the batteries because the REX switch is being triggered and left on. WA 5200 - No it will not drain the batteries because ...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
How long does the REN and REX stay active on a WA lock.
When the REN option or REX option is triggered, how long does it keep the lock awake for once activated?   Answer: It keeps the lock awake for 15 seconds...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics
I-Class Card memory for Wireless
The iClass card can be ordered with different memory sizes.  This is only important if they are using the iClass for more than access control where they would be reading and writing non-access co...
Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics