Category: Schlage Electronics

(Results from 1 to 3)
Can you use a StratIS tablet to update the firmware on the BE367 (SPED) locks?
No you cannot update the firware on the BE367 with StratIS tablet. You must use our HHD (Hand Held Device) to update the firmware on the BE367 (SPED) locks. ...
Schlage Commercial » Electronic Locks » Hand Held Devices » Legacy » Schlage Electronics | Schlage Commercial » Multi-Family
How do I connect the HHD to the Legacy WA series PIM—OTD?
Connect the HHD to the serial connection on PIM-OTD, press and hold the SA button while pressing and releasing the reset button.  Continue to hold the SA button until the LED's start flash...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD | Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Hand Held Devices » Legacy » Schlage Electronics
How do you put a legacy PIM TD2 into link mode?
Press and hold SA or SB while momentarily pressing and releasing the PIM Reset Switch, S3. Continue pressing SA or SB until LEDs CR7 and CR10 both start flashing. ...
Schlage Commercial » Electronic Locks » Hand Held Devices » Legacy » Schlage Electronics

Support by product