Category: Schlage Electronics

(Results from 31 to 40)
Can I charge my HHD through the USB port of a PC?
The HHD can be charged by a PC USB or a hard wired product with USB. Ensure that the SUS is not running while charging. To enable USB charging on the HHD do the following. Select START> SETTIN...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
How do I couple a Hand Held Device to a PIM400
If the PIM400 has already been coupled with a HHD, the Coupling process will be disabled and the PIM400 will no longer go into its Coupling Mode.  You must RESET the PIM400 in order to allow (re-en...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics
Why I can't see firmware file on HHD?
If the file is not on my device, is usually on my documents on hhd to transferred it back to my device, press and hold stylus to file, you will get several options select copy and go back to my device...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Do I have to couple each lock with the HHD/SUS after the coupling password is changed or updated?
After updating the SUS coupling password, subsequent HHD’s will need the new coupling password entered before they can update any information in the lock, once the HHD has the correct coupling passw...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
Where can I order a Hand Held Device (HHD), Pidion, accessories?
Warranty on the HHD is one (1) year from date of purchase.    The battery for the HHD (Bluebird Pidion) is covered under warranty.   However, as the batteries are not ava...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Can a CT5000, WRI400, AD, or CO be programmed using an HP IPAQ?
The HP IPAQ is not able to program any locks that use a USB port as a programming terminal. The HP IPAQ will only program older legacy locks that use the null modem serial cable and CIP interface modu...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics
Does SUS (Schlage Utility Software) run on the HP IPAQ PDA?
The SUS (Schlage Utility Software) will not run or work on the older HP IPAQ PDAs. The older HP IPAQ PDAs run CEUplink to interface and program legacy locks. The SUS (Schlage Utility Software) will on...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Why does the Schlage Utility Software application display the error message "E201 - This device is not connected?"
The E201 message can be ignored and all normal SUS and lock functions will be maintained.  Click "OK " and continue. Update the Schlage Utility Software (SUS) to version 4.6.0 or higher.&...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
How does Cache mode work on AD400 and AD300 locksets?
An AD400 granting credentials access in “cache mode” will blink the Schlage with the normal green LED, followed by a brief red Schlage LED flash, indicating no RF communication and access was gran...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics
Why do I get error message "E701 - Programming Lock Failed" on my Hand Held Device while programming an AD lockset?
Update your lockset using ADFwPkg 2.19.0 or higher.  This new firmware update resolves this programming error problem (E701) and the error will no longer be presented....
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics