Category: Schlage Electronics

(Results from 1 to 10)
Upgrading any AD-Series lockset to an AD300 - power restrictions
Connect 12VDC or 24VDC power supply to the AD300 lock before attempting HHD communication....
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics
Can UpLink be run on the Pidion units
Uplink is not compatible with the HHD/SUS platform....
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Can an AD lock be programmed so that a keypad code can be manually entered even though the unit is normally computer managed?
AD Firmware released prior to FW package 2.15.1: The SUS will automatically disable manual programming whenever the HHD is coupled with the lock.Locks with AD Firmware Package versions 2.15.1 and...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics
Can't tap anything on the HHD screen,; Screen unresponsive
 Ensure the HHD  in  "Hold " mode. The hold slide button is located on the left side of the HHD. Ensure that the hold slide control is in the up position. Down will effectively lock the...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Why won't my HHD connect to the AD300 lock?
If the  AD300  power is not correctly connected it may not communicate or other wise function correctly.The AD-Series locks must be hard wire powered through the comm board. It is not compat...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics
Can't change credential settings on locks with Credential Readers without keypads
The Schlage Utility Software application does not communicate properly with locks that have credentail readers without a keypad.   Credential readers affected are .... PR, MG, SM, and MT crede...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Auto and Manual Update Mode on the SUS How do I set up my HHD to do auto updates? Why won't my HHD do auto updates?
Check the configuration of the HHD /SUS.Update Mode:When Auto Update is selected, the SUS will automatically set the date and time in the lock to which it is connected, retrieve the audit and program ...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
Add New Hardware Wizard pops up connecting HHD to PC
The HHD doesn't require drivers to be installed. "Add New Hardware Wizard" pops up, because of communication conflicts due to  SUS software running on  HHD. SUS is only for communicatio...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics
The default PIN code (13579#) does not work on my AD or CO250 lock?
In the factory default reset state, an AD250/ CO250  lock with a keypad  will  have a default PIN of 13579 and “#”.Legacy Campus Locks (CL) that were replaced by AD250 and CO25...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics
Retriving audit manually on HHD when set for Manual Update in Update Mode
With the SUS Options set to "Manual Update" under the "SUS Options/Update Mode" menu.   To retrieve an audit without actually programming the lock, do the following:   While the HHD/SUS ...
Schlage Commercial » Electronic Locks » Hand Held Devices » HHD » Schlage Electronics

Support by product